Store
5-13
N
While all the stored settings are being erased, the top display
shows ‘ClEArIng’, and the middle display shows ‘0’, ‘00’,
etc.
When Reset has finished the middle display returns to
‘rESEt’.
The C80 remains in Setup Mode.
Use Reset with caution, as you will lose all your stored settings.
Reset takes approximately 15 seconds.
Store
This is an important section, you should read it carefully.
This stores all your settings, then returns to Normal Operating
Mode.
The middle display shows ‘StorE’.
Press [ent] or the Select Key next to the ‘S’ to select the Store
function.
The middle display shows ‘StorEd’ for a few seconds, as
your settings are stored.
The C80 leaves Setup Mode.
Alternatively, you can press [set up] at any time to leave Setup
Mode and abandon any changes.
To Next Page
Loading...
