Special functions
7-2
N
Menu function
You can only use two Special Functions at a time.
To find out which function is allocated to each key:
1. Press [menu] to see the Menu.
The display shows:
‘bolt HOl 1’
‘ArC 2’
2. Press [menu] again to turn the Menu off.
Using a function
To use a function press [F1], [F2] or [F2
+
], according to the
instructions given later in this guide.
Allocating a function to a key
To allocate a function to a key:
1. Press [menu].
2. Press the Select Key next to the ‘1’ or ‘2’ to choose which
function key to edit.
3. Press the up or down navigation key to cycle through the
list of Special Functions.
4. Press [ent] to allocate the selected Special Function to the
function key.
If certain functions are running when you press [menu], then in
place of the function name, the display shows ‘turn Off’.
If you want to allocate a function, press [menu] again to turn the
Menu off. If you want to allocate a different function to that
function key, then you need to turn the function off before trying
again.
To Next Page
Loading...
