EasyManua.ls Logo

Newport HT70 - Size and Weight; Factory Default Parameters; Miscellaneous

Newport HT70
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPR360U A0509
5-1
5
OPR360U A0509
5-1
5
Environment Description
Operating Humidity 15 to 95% non-condensing
Operating Altitude Sea level to 15,000 ft (0 to 4,572 m)
There is no altitude limitation when
HT70 is operated in a pressurized
environment.
Operating Pressure 600 to 1,100 mbar
Storage and Shipping Temperature
40ºC to 65ºC
Storage and Shipping Humidity 0 to 95% non-condensing
Size and Weight
Height (includes handle) 10.25 inches (26.04 cm)
Width 9.75 inches (24.77 cm)
Depth 11 inches (27.94 cm)
Weight 17.40 lbs. (7.89kg)
Factory Default Parameters
Patient Settings:
MODE A/CMV
VT (Volume Control) 500 mL
i time 1.0 sec
RR 15 b/min
Ptrig 1.0 cmH2O
iPaw Alarm 5 cmH2O
hPaw Alarm 40 cmH2O
hMVI Alarm 3 L/min
iMVI Alarm 20 L/min
PEEP/CPAP 0 cmH2O
PS 0 cmH2O
Alarm Loudness Level 7
Miscellaneous
Patient Circuit Reusable or disposable 22 mm I.D.
adult or 15 mm I.D. pediatric circuit with
3/16 inch (4.8 mm) I.D. proximal
pressure sensing line, 1/8 inch (3.2 mm)
I.D. exhalation valve control drive tubing,
and exhalation valve.
NOTE: Newport Medical cannot
guarantee the safe use of breathing
circuits that are not recommended by
Newport.
OPRHT70 A0310
9-8
9
Specifications

Table of Contents