OPRHT70 A0310
4-12
4
Navigating the Screens
Advance Screen Navigation (Hospital Domain)
See Section 9, Specifications, for ranges and more details for each
parameter.
Press the Accept button to confirm changes made to any of the
following parameters:
1. Slope Rise touch button, use s or t to
adjust from 1 - 10
2. PS Exp Threshold * touch button, use s or t to
adjust from 5 - 55%
3. PS Max i Time * touch button, use s or t to
adjust from 0.1 - 3.0s
4. Flow [Square or Descending] touch button to select square or
descending ramp flow waveform
5. Utility Settings touch button to access Utility
screen, see description on the
following pages
NOTE: If you have not pressed the Accept button, you can press
Cancel at anytime to revert to previous setting.
* Not available on all models
1.
4.
2. 3.
5.
To Next Page
Loading...