OPRHT70 A0310
2-2
2
Overview of Controls, Screens and Connectors
Rear Panel Overview
1. “Power Pac” battery pack
2. External power supply input
3. Remote alarm output Connects to Nurse Call systems.
4. Release latch Push to remove battery pack.
5. RS-232 output External communication port to communicate
with central monitoring systems
6. Serial number label
7. On/Off power switch Momentary switch to power On/Off the
ventilator.
Right Side Overview
1. Fresh Gas Intake port / Optional Oxygen Accessories /
Bio-filter connection Allows attachment of the optional Air
Oxygen Entrainment Mixer*, Low Flow Oxygen Blending Bag or
biofilter.
*Call for availability
To Next Page
Loading...