Newtec MDM3300 - Multicast; View the Multicast Configuration; The Multicast Parameters

R3.1_v1.2
49/76
Modem Web Interface
User Manual MDM3X00
4.7.5 Multicast
The satellite can send several sessions to a number of satellite terminals at the same time.
This is IP multicasting.
There are two configurations possible in the satellite terminal to receive these programs:
Static IP addresses:
IP addresses where the sessions are received.
You will be provided with these addresses if needed.
IGMP:
A protocol to receive multicast sessions without entering specific IP addresses.
4.7.5.1 View the Multicast Configuration
4.7.5.2 The Multicast Parameters
The displayed parameters and their description:
Parameter Description
Multicast Mode • Disabled: Multicast mode is disabled.
• Static: The active Multicast Configuration is based on
entered Static Multicast IP Addresses.
• IGMP Dynamic: Dynamic IGMP multicast mode.
Static Multicast IP
Address 1-10
Maximum 10 multicast IP Addresses can be assigned and
active in case of Static Multicast Mode.