Next Matrix Live - Page 38

8.4 FUNCTION KEYS IN REGISTER MODE
GB
In REGISTER mode there are 6
ffuunnccttiioonn kkeeyyss
see (Fig. 40 par
88..33
)
EDIT key :
Press this key to create/modify the active register, the display changes as
shown in
(Fig. 42 par
88..55
)
NAME key :
Press this key to modify register name.
Through the encoder choose the character, Through the OK or CHAR Key we insert/modify
the next/precedent character. Press
DONE key to confirm the modify of the name.
BANK key :
Press this keys to select the successive/precedent page
KEY key :
Press this key to change register function
GO-PAUSE = Pause/Go register
FLASH 100% = Play the register at 100% up to the key isn’t left (with cur-
sor to zero too)
FLASH GO = Play the register up to the key isn’t left
TAP KEY = Change the register step by step
MODE
key :
Press this key to cange register function fader
ONCE = Register play once and stop it
SOLO = Only one register in output the others has excluded.
ONCE + SOLO = Only one register in output the others has excluded, regi-
ster play once and stop it