Next Matrix Live - Page 56

10.14 MENU: SYSTEM SETTINGS
GB
Select SYSTEM SETTINGS from main menù the display changes as shown in (Fig. 60)
As soon as this function is activated, the display shows the first function available.
Through the encoder it is possible select the SYSTEM SETTINGS functions available.
To activate the selected function press the same (OK) key.
ALLOWS TO CHANGE THE DISPLAY CONTRAST, TO SET A PASSWORD, RS 232
FUNCTIONS, SHOW THE SOFTWARE VERSION.
Fig. 60
---------------------------------------------------------------------------------------------------------------------
AVAILABLE ONLY AFTER THE ACTIVATION OF THE MENU FUNCTIONS (see par.10.1)
---------------------------------------------------------------------------------------------------------------------
SYSTEM SETTINGS
SSEETT LLCCDD CCOONNTTRRAASSTT
SSEECCUURRIITTYY LLOOCCKK
RRSS 223322 HHOOSSTT LLIINNKK
AABBOOUUTT MMAATTRRIIXX
WWII--DDMMXX TTRRAANNSSMMIITTTTEERR
AABBOOUUTT MMAATTRRIIXX
SYSTEM SETTINGS
SSEETT LLCCDD CCOONNTTRRAASSTT
SSEECCUURRIITTYY LLOOCCKK
RRSS 223322 HHOOSSTT LLIINNKK
AABBOOUUTT MMAATTRRIIXX
WWII--DDMMXX TTRRAANNSSMMIITTTTEERR
AABBOOUUTT MMAATTRRIIXX
10.15 MENU: SET LCD CONTRAST
---------------------------------------------------------------------------------------------------------------------
DISPONIBILE SOLO DOPO L’ATTIVAZIONE DELLA FUNZIONE SYSTEM SETTINGS (see par.10.14)
---------------------------------------------------------------------------------------------------------------------
THIS FUNCTION ALLOWS TO CHANGE THE GRAPHIC DISPLAY CONTRAST
The display changes as shown in (Fig. 61)
Through the encoder or the fader under the
DONE write, you can modify the
display contrast . To confirm the modify press the
OOKK
key, to get out of the func-
tion press the
EESSCC
key.
DD OO NN EE
Fig. 61