NEXTIVITY CEL-FI QUATRA EVO User Manual

50 pages

To Next Page

CEL-FI QUATRA EVO Installation and User Guide

Americas Version

MODEL NUMBERS:

NU: Q42-Z1CNU

CU: Q41-BXCU

Table of Contents2
About this Guide5
CEL-FI QUATRA EVO Key Features6
Hardware Components7
Network Unit (NU)8
Figure 1: QUATRA EVO Hardware Components and Ports8
Coverage Unit (CU)9
QUATRA EVO Fiber Hub9
QUATRA 4000 Range Extender and Fiber Range Extender10
Figure 2: QUATRA EVO Installation with Fiber HUB10
Donor Antennas11
Figure 3: QUATRA Range Extender Installation11
Figure 4: CEL-FI Donor Antennas11
Server Antennas12
Couplers12
Nextivity WAVE Portal12
Figure 5: Server Antenna Port12
Installation Architecture Examples14
Figure 6: QUATRA EVO System Architecture14
Figure 7: QUATRA EVO System Architecture with Fiber Hub Option14
Real World Example 115
Real World Example 215
Figure 8: off Air Install, 75K Ft Building, Single Operator15
Figure 9: off Air Install, 75K Ft Building, Dual Operator16
Real World Example 317
Figure 10: off Air + Small Cell Install, 75K Ft Building, Dual Operator17
Real World Example 418
Figure 11: Larger 300K Ft Building with Two NU+HUB Systems, Dual Operator18
Installation19
Mounting the Network Unit (NU) or Optional HUB20
Connecting Donor Sources to the NU23
Figure 12: Antennas in Single Operator Mode24
Figure 13: Antennas in Dual Operator Mode25
Figure 14: Small Cell Donor Input25
Installing Cus CU Wall Bracket Mounting26
Figure 15: Unistrut Hardware Mounting Option28
Figure 16: Ceiling Tile Bracket Mounting Option28
Cabling the NU or HUB to the Cus29
Figure 17: Connecting Server Antenna or Cable29
Figure 18: CU Port Assignment on the NU29
Using a QUATRA Range Extender (QRE)31
Figure 19: QUATRA Range Extender31
Figure 20: QUATRA Fiber QRE31
Creating a Connection from Your EVO to the WAVE Portal32
Power on the Completely Installed System33
Commissioning and Settings on the WAVE Portal34
Figure 21: Selecting NU Serial Number in WAVE Portal34
Figure 22: Registering Your NU in WAVE Portal35
Figure 23: New System Setup35
Figure 24: System Settings in WAVE Portal36
Figure 25: Selecting Operators in WAVE Portal36
Diagnostics37
NU and HUB Leds37
Figure 26: NU Leds37
CU Leds38
WAVE Portal Notifications38
Figure 27: CU Leds38
Figure 28: WAVE Portal Guidance Alerts40
Tips41
Figure 29: Ethernet Cable Status42
Figure 30: Donor Antenna Placement Guidance42
Service Agreement44
Helpful Tools and Signal Quality44
COMPASS XR and WAVE PRO App44
WAVE Field Tool44
Donor Signal Quality45
CEL-FI Antennas46
Figure 31: LPDA-R Antenna46
Figure 32: Wideband Directional Antenna46
Figure 34: (Low-Profile) LP SISO Indoor Omni Antenna48
Specifications49
Trademarks49
Warranty & Limitation of Liability49
Regulatory49
Advanced Information - FCC/ISED RF Exposure Requirements49
Compliance50
Glossary50

Need help?

Do you have a question about the NEXTIVITY CEL-FI QUATRA EVO and is the answer not in the manual?

NEXTIVITY CEL-FI QUATRA EVO Specifications

General

Model	CEL-FI QUATRA EVO
Category	Extender
Max Gain	100 dB
Installation	Professional Installation Recommended
Coverage Area	Up to 100, 000 sq ft
Downlink Frequency Range	777-787 MHz
Uplink Frequency Range	777-787 MHz
Power Input	100-240V AC, 50/60 Hz
Network Compatibility	Compatible with all major North American carriers
Operating Temperature	-20°C to 60°C
Weight	5.5 lbs
Compatibility	Compatible with all major North American carriers

Related product manuals

NEXTIVITY Cel-Fi GO+

2 pages

NEXTIVITY CEL-FI QUATRA EVO User Manual

Table of Contents

NEXTIVITY CEL-FI QUATRA EVO Specifications

Related product manuals