Nibe F2040 Technical Manual

Control board (PWB1) 12/16 kW
1 Remove the top cover.
2 Remove the front panel.
F2040 12/16 kW
Pin
Pin
3. Disconnect the cables.
4. Count and note the num-
ber of disconnected cables.
5. Remove the six pins and
remove the card.
6. Assembly takes place in
the reverse order.
89Chapter 7 | Component replacementNIBE™ F2040

Nibe F2040 Specifications

General

Type	Air/water heat pump
Refrigerant	R410A
Operating Temperature Range Heating	-20°C to 35°C
Operating Temperature Range Cooling	10°C to 46°C
Sound Power Level	56-62 dB(A) (depending on model)