Nibe F370 Installer Manual

Supplied components
Room sensorOutside sensor
LEK
LEK
LEK
Current sensorEarth cable
Location
The kit of supplied items is placed on top of the
product.
Removing the covers
Front cover
4
1
2
3
1.
Remove the air treatment hatch by pulling it
straight out.
2.
Remove the screws from the lower edge of the
front cover.
3.
Lift the cover out at the bottom edge and up.
4.
Pull the hatch towards yourself.
Side covers
LEK
LEK
L
EK
The side covers can be removed to facilitate the install-
ation.
1.
Remove the screws from the upper and lower
edges.
2.
Twist the cover slightly outward.
3.
Move the hatch backwards and slightly to the side.
4.
Pull the cover to one side.
5.
Pull the hatch forwards.
Removing parts of the insula-
tion
Parts of the insulation can be removed to facilitate the
installation.
Insulation, top
1.
Grip the handle and pull straight out as illustrated.
LEK
9Chapter 2 | Delivery and handlingNIBE™ F370

Nibe F370 Specifications

General

Type	Exhaust Air Heat Pump
Refrigerant	R290
Energy class	A++
Energy Efficiency Class (Space Heating, 35°C)	A++
Energy Efficiency Class (Space Heating, 55°C)	A+
Application	Residential
Hot Water Tank Volume	170 l
Heating Power	8.5 kW