General
FIGHTER 1240
2
In order to get the ultimate benefit from your heat pump
FIGHTER 1240 you should read through this Installation
and Maintenance Instruction.
FIGHTER 1240 is a heat pump central for the production of
heating and domestic hot water in detached and terrace
houses. Soil, rock or lakes can be used as the heat source.
FIGHTER 1240 is a Swedish made quality product offer-
ing a long life span and safe operation.
Completedby the installer when the heat pump is installed
Installation date
The serial number (95), should always be stated with all
correspondence with NIBE.
______________
FIGHTER 1240-
__
Installation engineers
The type of brine – Mixing proportion/freezing point
Active drilling depth/collector length
Commissioning checks
Brine temperature (in/out)____ / ____
Pump setting ___
(Nominal temperature diff 2 - 5 °C)
Temperature heat medium (supply/return)____ / ____ Pump setting ___
(Nominal temperature diff 5 - 10 °C)
Settings
Date ________ Signed ____________________________
Menu Factory
settings
1.4 Start time.HW ............ 47
1.5 Stop temp.HW .............. 54
1.6
Stop Temp. XHW
............ 60
1.8
Interval XHW
.............. 14
2.1 Curve coefficient .......... 9
2.2 Offset heating curve...... 5
2.3
Flow temp./MIN
.............. 15
2.4
Flow temp./MAX
.............. 55
2.7
Return temp./MAX
.......... 53
Position Factory
settings
100
Fuse
........ 20
101
Max electr. output
...... C
102
Max boiler temp
...... C (65)
Anti-corrosion
Enamel Stainless steel Copper
To Next Page
Loading...
