Menu system
When the door to the indoor module is opened, the
menu system’s four main menus are shown in the dis-
play as well as certain basic information.
,1'225 &/,0$7(
0< 6<67(0 ,1)2
+27 :$7(5
6(59,&(
,QGRRU WHPSHUDWXUH LI URRP VHQVRUV DUH LQVWDOOHG
+RW ZDWHU WHPS
7HPSRUDU\ OX[ LI
DFWLYDWHG
2XWGRRU
WHPSHUDWXUH
(VWLPDWHG DPRXQW RI
KRW ZDWHU
,QIRUPDWLRQ DERXW
RSHUDWLRQ
Menu 1 - INDOOR CLIMATE
Setting and scheduling the indoor climate. See page
37.
Menu 2 - HOT WATER
Setting and scheduling hot water production. See page
42.
Menu 3 - INFO
Display of temperature and other operating informa-
tion and access to the alarm log. See page 44.
Menu 4 - MY SYSTEM
Setting time, date, language, display, operating mode
etc. See page 45.
Menu 5 - SERVICE
Advanced settings. These settings are not available to
the end user. The menu is visible by pressing the Back
button for 7 seconds. See page 50.
Symbols in the display
The following symbols can appear in the display during
operation.
DescriptionSymbol
This symbol appears by the information
sign if there is information in menu 3.1
that you should note.
These two symbols indicate whether the
compressor in the outdoor unit or addi-
tional heat is blocked in VVM 310.
These can, for example, be blocked de-
pending on which operating mode is se-
lected in menu 4.2, if blocking is sched-
uled in menu 4.9.5 or if an alarm has oc-
curred that blocks one of them.
Blocking the compressor.
Blocking additional heat.
This symbol appears if lux mode for the
hot water is activated.
This symbol indicates whether VVM 310
has contact with NIBE Uplink™.
This symbol indicates whether solar
heating is active.
Accessory needed.
This symbol indicates whether "holiday
setting" is activated in menu 4.7.
NIBE™ VVM 310Chapter 7 | Control - Introduction34
To Next Page
Loading...
