Nibe VVM 310 - Technical Specifications

Technical specifications
IP 21
3x400V
3x400V
14kWMaxim heat pump output NIBE F2025 with program version 51 or later
1)
10kWMaxim heat pump output NIBE F2026 with program version 51 or later
1)
14kWMaximum heat pump output NIBE F2300
1)
12kWMaximum heat pump output NIBE F2040
1)
12kWAdditional power
Electrical data
400V 3NAC 50 HzRated voltage
19.4AMax operating current
20AFuse
10 – 110WOutput, Heating medium pump
10 – 110WOutput, charge pump
IP 21IP class
Heating medium circuit
low energyEnergy class circ-pump
low energyEnergy class charge pump
0.3 (3 bar)MPaMax system pressure heating medium
500litres/hMin flow
70°CMax HM temp
Pipe connections
G20 int.Heating medium
G20 int.Hot water connection
G20 int.Cold water connection
G20 int.Heat pump connections
G20 int.Connection for expansion vessel
1)
Applies with an outdoor air heat pump at 7/45 °C (outdoor temperature/flow line temperature)
63Chapter 12 | Technical dataNIBE™ VVM 310