Nice 3501 User Manual

5
1.3 What is Included
P/N Name Note
#CBOX1050 Control Box
#CHBOX350 Chassis
#ABOX350 Arm Assembly
1.4 Product Specifi cations
Model 3501
Electrical Data
Power Supply 12 - 20 VDC
Operating Voltage 12VDC
Idle Current
110mA (awake)
10 mA (standby)
Performance Data
Speed open 90° (s) 12 - 20 seconds
Duty Cycle (cycles/
hour)
Varies based
on charger time
Dimensional and
General Data
Working Temp
(°F Min/Max)
-4º to 122º F
(-20º to 50º C)
Dimensions -
Control box (inches)
18w x 18h x 8d inches
Dimensions -
Actuator (inches)
17.8w x 12h x 8.3d
inches
Listed to UL325 Usage Class I, II, III, IV
1.5 The installation of this product is not a “do-
it-yourself” project. A qualifi ed gate operator
installation company should be contacted
to install the gate operator to ensure a safe
and reliable installation. Since many aspects
of gate system installation are under the
control of the installer, it is the responsibility
of the property owner to ensure the installer
is qualifi ed to carry out the installation in a
safe and professional manner.
1.6 Consult local government agencies for
up-to-date rules and regulations as certain
municipalities have established licensing,
codes or regulations that regulate automated
gate system design and installation.
2. General Safety Information
A gate operator is only a component in a gate
system. The other parts of the gate system
can include the gate, the external entrapment
sensors, access controls, and vehicle detectors.
To have a gate system that provides safety,
security, and reliable operation it is essential these
components operate together as a system. It is
the responsibility of the system designer and/or
installer to ensure any safety or operational issues
have been addressed.
IMPORTANT SAFETY INSTRUCTIONS
1
.
READ AND FOLLOW ALL INSTRUCTIONS.
2.
Never let children operate or play with gate
controls. Keep the remote control away from
children.
3.
Always keep people and objects away from
the gate. NO ONE SHOULD CROSS THE
PATH OF THE MOVING GATE.
4.
Test the gate operator monthly. The gate
MUST reverse on contact with a rigid
object or stop when an object activates the
non-contact sensors. After adjusting the
force or the limit of travel, retest the gate
operator. Failure to adjust and retest the
gate operator properly can increase the risk
of injury or death.
5.
Use the emergency release only when the
gate is not moving.
6.
KEEP GATES PROPERLY MAINTAINED. Read
the user’s manual. Have a qualifi ed service
person make repairs to gate hardware.
7.
The entrance is for vehicles only. Pedestrians
must use separate entrance.
8. SAVE THESE INSTRUCTIONS.
WARNING
To reduce the risk of injury or death.

Nice 3501 Specifications

General

Brand	Nice
Model	3501
Category	Gate Opener
Language	English