English – 27
LED L4 Description
Off During normal operation it signals that the “Standby” mode is not active
On During normal operation it signals that the “Standby” mode is active
Flashes • Function programming in progress
• If it ashes together with LED L3, the gate leaf length recognition phase must be carried out (Paragraph 7.7)
LED L5 Description
Off During normal operation it indicates that the “Peak” mode is not active
On During normal operation it signals that the “Thrust” mode is active
Flashes Function programming in progress
LED L6 Description
Off During normal operation it signals that the “Pre-ashing” mode is not active
On During normal operation it signals that the “Pre-ashing” mode is active
Flashes Function programming in progress
LED L7 Description
Off During normal operation it signals that the “CLOSE” input activates a closing manoeuvre
On During normal operation it signals that the “CLOSE” input activates a partial opening manoeuvre
Flashes Function programming in progress
LED L8 Description
Off During normal operation it signals that ROBUS is congured as Master
On During normal operation it signals that ROBUS is congured as Slave
Flashes Function programming in progress
10
PRODUCT DISPOSAL
This product constitutes an integral part of the automation and, therefore, must be disposed of together with it.
Similarly to the installation phase, once the product reaches the end of its useful life, the disassembly and scrapping operations must be per-
formed by qualied personnel.
This product is made of various types of materials, some of which can be recycled while others must be scrapped. Seek information on the
recycling and disposal systems envisaged by local regulations in your area for this product category.
CAUTION! - Some parts of the product may contain polluting or hazardous substances which, if released into the environment,
constitute serious environmental and health risks.
As indicated by the adjacent symbol, the product may not be disposed of together with domestic waste. Sort the materials for
disposal, according to the methods envisaged by current legislation in your area, or return the product to the retailer when pur-
chasing an equivalent product.
CAUTION! - Local legislation may include the application of heavy nes in the event of improper disposal of this
product.
11
MAINTENANCE
To ensure constant safety levels a long service life, the system must be serviced regularly: at least every 6 months or after maximum 20,000
movements since the last service. ROBUS is equipped with a manoeuvre counter and a maintenance notication system; see Paragraph 8.5
“Maintenance notication”.
CAUTION! – The maintenance operations must be performed in strict compliance with the safety directions provided in this
manual and according to applicable legislation and standards.
01.
To Next Page
Loading...
Need help?
General
