English – 29
CE declaration of conformity
and declaration of incorporation of “partly-completed machinery”
Declaration in accordance with the following Directives: 2014/30/EU (EMC); 2006/42/EC (MD) Annex II, Part B
Note: the contents of this declaration correspond to that stated in the ofcial document led in the ofces of Nice S.p.A. and, in particular,
the latest version thereof available prior to the printing of this manual. The text herein has been re-edited for editorial purposes. A copy of
the original declaration can be requested from Nice S.p.A. (TV) Italy.
Declaration number: 210/ROBUS Revision: 12 Language: EN
Manufacturer’s name: NICE S.p.A.
Address: Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV) Italy
Person authorised to compile the technical documentation: NICE S.p.A.
Product type: Electromechanical gearmotor with incorporated control unit
Model / Type: RB600/A, RB600P/A, RB600P, RB600, RB600/V1, RB600S, RB500HS, RB1000P, RB1000, RB1000/V1, RB1000/A,
RB1000P/A, RB500HS, RB500HS/V1
Accessories: PS124 back-up battery, radio receivers models SMXI, OXI
The undersigned, Roberto Griffa, as Chief Executive Ofcer, hereby declares under his own responsibility that the product identied above
complies with the provisions of the following directives:
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the
laws of the Member States relating to electromagnetic compatibility (recast), in accordance with the following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to “partly completed machinery”:
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending Directive
95/16/EC (consolidated text)
– It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive
2006/42/EC and that the following essential requirements have been applied and fullled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2-
1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
– The manufacturer agrees to transmit to the national authorities any pertinent information on “partly completed machinery”, in response
to a motivated request, without prejudice to its intellectual property rights.
– Should the “partly completed machinery” be commissioned in a European country with an ofcial language different to the one used in
this declaration, a translation into that language accompanying this declaration must be provided by the importer.
– The “partly completed machinery” may not be commissioned until the nal machinery into which it is to be incorporated has been de-
clared to conform to the provisions of Directive 2006/42/EC, where appropriate.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011, EN 60335-2-103:2003+A11:2009
All parts of the product subject to the following standards comply with them:
EN 13241-1:2003+A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003+A1:2009
Oderzo, 21 April 2016
Ing. Roberto Griffa
(Chief Executive Ofcer)