English – 31
User manual
(to be handed to the end user)
• When the automation is used for the rst time, the instal-
lation technician must inform the user about the origin of
the residual risks and the user must take some time to
read this user manual.
• It is important to store this user manual (delivered by the
installation technician) for future reference and hand it
over to the new owner when the automation is trans-
ferred.
• Your automation system is a machine that will faithfully
execute your commands; unreasonable or improper use
may make it dangerous: do not operate the system if
there are people, animals or objects within its range of
operation.
• Children: automation systems are designed to guaran-
tee high levels of safety and security. They are equipped
with detection devices that prevent movement if people
or objects are in the way, guaranteeing safe and reliable
activation. However, it is advisable to avoid letting chil-
dren play in the vicinity of the automation and remote
controls should always be kept out of their reach – it is
not a toy!
• Checking the system: in particular all cables, springs
and supports, to detect possible imbalances, and signs
of wear or damage.
–
Check that the system is safe on a monthly basis using
safety equipment with sensitive edges.
– Do not use the automation if repairs or adjustments are
required; any fault or an incorrectly balanced gate may
lead to physical injury.
• Faults: if the automation is malfunctioning, shut off its
power supply. Never attempt any repairs; contact your
local installer for assistance.
– The system can be operated manually: release the
gearmotor as described in “Manuallly releasing the gear-
motor” section.
– Do not modify the system or its programming and ad-
justment parameters in any way: your installer is exclu-
sively responsible for these operations.
– The nal test, periodic maintenance and any repairs
must be documented by the person who performed
them, and the relative documents must be stored by the
owner of the system.
Important: have the system repaired as soon as pos-
sible if the safety devices are malfunctioning. “Transit is
allowed only if the gate is completely open and station-
ary”.
• Disposal: At the end of the automation’s life, ensure that
it is disposed by qualied personnel and that the materi-
als are recycled or scrapped according to current local
regulations for this product category.
• Maintenance: as with all machinery, this automation
requires periodic maintenance to ensure optimal opera-
tion, extended lifetime and complete safety. Arrange a
periodic maintenance schedule with your installation
technician. Nice recommends that maintenance checks
be carried out every six months for normal domestic use,
but this interval may very depending on the intensity of
use. Only qualied personnel is authorised to carry out
checks, maintenance operations and repairs.
• Manually releasing the gearmotor
• Manually locking the gearmotor
To Next Page
Loading...
Need help?
General
