Nidec COMMANDER S100 - Power Dissipation and Storage

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Running the
motor
Drive
parameters
Communications Diagnostics
Technical data
UL Listing
Information
110 Commander S100 User Guide
10.2 Power dissipation
Table 10-3 Drive losses
10.3 Drive storage
-40 °C (-40 °F) to +60 °C (140 °F) for long term storage.
Storage time is 2 years.
Low voltage capacitors cannot be reformed due to their location in the circuit and thus may require replacing if the drive is stored for a period of 2
years or greater without power being applied. It is therefore recommended that drive are powered up for a minimum of 1 hour after every 2 years of
storage. This process allows the drive to be stored for a further 2 years.
Drive Model
Number
Power Rating
Supply Phases
Standby Drive Losses
Drive Losses at Rated
Power
Efficiency
kW hp W W %
100 V Drives
S100-01113 0.18 0.25 1 3.1 9.9 96.1
S100-01123 0.25 0.33 1 3.1 12.3 96.4
S100-01133 0.37 0.5 1 4 17.8 96.2
S100-03113 0.55 0.75 1 4 24.7 96.4
S100-03123 0.75 1 1 3.4 40.8 95.8
S100-03133 1.1 1.5 1 3.2 54.5 95.5
200 V Drives
S100-01S13 0.18 0.25 1 4.2 12.3 96.4
S100-01213 0.18 0.25 2 4.2 11.2 96.4
S100-02S11 0.18 0.25 1 3.7 10.7 96.2
S100-01S23 0.25 0.33 1 4.2 13.8 96.7
S100-01223 0.25 0.33 2 4.2 12 96.7
S100-02S21 0.25 0.33 1 3.7 12.9 96.6
S100-01S33 0.37 0.5 1 4.2 18.4 96.5
S100-01233 0.37 0.5 2 4.2 16.3 97
S100-02S31 0.37 0.5 1 3.7 21.4 95.8
S100-01S43 0.55 0.75 1 4.1 26.6 96.8
S100-01243 0.55 0.75 2 4.2 24.7 97.2
S100-02S41 0.55 0.75 1 4.5 26.5 96.7
S100-01S53 0.75 1 1 4.1 24.7 96.9
S100-01253 0.75 1 2 4.3 26.5 97
S100-02S51 0.75 1 1 4.7 33.9 96.8
S100-01D63 1.1 1.5
1 5.2 42.9 97.0
3 5.7 37.3 97.4
S100-02S61 1.1 1.5 1 3.4 43.1 97.1
S100-01D73 1.5 2
1 4.3 57.5 96.7
3 4.0 48.5 97.3
S100-02S71 1.5 2 1 4.4 62.7 96.8
S100-03D13 2.2 3
3 3.0 93.9 96.4
1 4.0 76.8 97
400 V Drives
S100-02413 0.37 0.5 3 6.9 18.2 96.9
S100-02423 0.55 0.75 3 10.5 24.5 97
S100-02433 0.75 1 3 6.8 26.8 97.3
S100-02443 1.1 1.5 3 6.8 34.3 97.6
S100-02453 1.5 2 3 6.5 45.4 97.6
S100-02463 2.2 3 3 6.5 89.3 96.9
S100-03413 3 3 3 6.6 84.6 97.6
S100-03423 4 5 3 6.4 118.6 97.6