INTRODUCTION SPDM CONTROL BOX
NIDEC ASI S.P.A. – SPDM CONTROL BOX USER MANUAL
8 IMSPDCB2EN
TERMS AND ACRONYMS
EXPOSED PERSON: (Annex I, 1.1.1-c Directive 2006/42/EC).
Anyone who is entirely or partially in a dangerous area.
INTENDED USE: (Annex I, 1.1.1-h Directive 2006/42/EC).
Using the partly-completed machine in compliance with the information supplied in the instructions for use.
DANGEROUS AREA: (Annex I, 1.1.1-b Directive 2006/42/EC).
Any area inside and/or near the partly-completed machine where the presence of an exposed person constitutes a health and safety risk for
that person.
RISK: (Annex I, 1.1.1-e Directive 2006/42/EC).
Combination of probability and seriousness of an injury or harm to health that could occur in a dangerous situation.
RESIDUAL HAZARDS: (Ref. EN 12100)
Hazard that has not been possible to eliminate or reduce through the design, against which the protections are not (totally or partially) efficient.
The Manual (Chap. 4) describes the residual risks and information, instructions and warnings/prescriptions to manage the Residual Risks that
must be borne by the user.
PROTECTION DEVICE: (Annex I, 1.1.1-g Directive 2006/42/EC). Device (different from a guard) that reduces the risk, on its own or associated
to a guard.
GUARD: (Annex I, 1.1.1-f Directive 2006/42/EC).
Element of the partly-completed machine used specifically to guarantee protection through a physical barrier.
PARTLY-COMPLETED MACHINE (Article 2-g Directive 2006/42/EC).
Assemblies that almost constitute a machine but that, on their own, are unable to guarantee a well-determined application. A drive system is a
partly completed machine.
Partly-completed machines are solely intended to be incorporated or assembled with other machines or other partly-completed machines or
appliances to form a machine in accordance with Directive 2006/42/EC.
To Next Page
Loading...
Need help?
General
