SPDM CONTROL BOX INTRODUCTION
NIDEC ASI S.P.A. – SPDM CONTROL BOX USER MANUAL
IMSPDCB2EN 3
USER MANUAL
Read this manual carefully in full before incorporating/installing, commissioning, using and servicing the SPDM CONTROL BOX.
The user and/or integrator of the SPDM CONTROL BOX and of its User Manual must know and be able to use the basic principles of electrical
engineering and physics, the practice of electrical wiring, the symbols used in wiring diagrams, the safety rules and must be experienced in
using Low Voltage electrical equipment.
Even thoroughly reading this manual cannot, in any way, replace the fact that authorised personnel in charge of incorporating/installing, using
and servicing the SPDM CONTROL BOX must have adequate experience and have been properly trained.
The user and/or integrator can contact the manufacturer at any time to request further information to what is contained in this manual or to
propose improvements.
This manual, along with the programming manual and the job order documents, makes up all the documents that the user or integrator must
know and apply.
In order to guarantee maximum operating reliability, the manufacturer has carefully chosen the materials and components used to manufacture
the SPDM CONTROL BOX, performing a series of rigorous checks and tests before shipment.
Proper SPDM CONTROL BOX operation over time depends on correct use and on adequate maintenance, following the instructions listed in
this manual and in the documents provided.
The instructions contained in this manual are intended for expert and specialised technical personnel with adequate knowledge in the electrical,
electronic and mechanical fields.
For further details on the definition of experienced person and designated person, refer to the EN 50110-1 standard.
To properly integrate and use the SPDM CONTROL BOX inside the final equipment/machine/system (not supplied by the manufacturer and not
described in this manual), it is assumed that the work environment is suitable and complies with the laws in force with regard to health and
safety.
The information contained in this manual must only be used as a guide and does not constitute any sort of contract.
Manual updates are available at nidec-answerdrives.com
All rights reserved.
Duplicating or transmitting this manual in any form or by any means, including photocopies, recordings or using storage or data retrieval
systems is prohibited without written consent from the editor.
To Next Page
Loading...
Need help?
General
