Nikon Coolpix 5000 - Controlling the Flash: Speedlight Options

152
Camera Setup
Controlling the Flash: Speedlight Options
This sub-menu contains options for controlling
built-in and external Speedlights.
Controlling Flash Output: Variable Power
This sub-menu is used to adjust flash output. Flash
output can be lowered or raised by from –2.0 EV
to +2.0 EV in increments of
1
/
3
EV.
Options for External Speedlights: Speedlight Cntrl
This sub-menu is used to control the built-in Speed-
light when using external flash accessories con-
nected to the camera’s accessory shoe ( 192).
Auto
Built-in Speedlight functions normally when no external
flash accessories are attached. When external flash acces-
sory is attached, built-in Speedlight emits low-intensity
pre-flash immediately before main flash to help ensure
correct exposure, but flash lighting for photograph is pro-
vided by external flash only. Flash mode for flash acces-
sory is set by pressing button ( 82). Flash mode se-
lected for external flash is displayed in control panel and
monitor as shown in table opposite; monitor shows in
all modes to indicate that light from built-in Speedlight will
not affect outcome of photograph.
Option Description
Int&Ext Active Built-in Speedlight fires at same time as external flash.