96
Specifications for Optional Adapters
Some optional adapters can be used with both the 4000 ED and COOLSCAN IV ED, while others are
exclusively for use with the 4000 ED.
IA-20 (S) IX240 FILM ADAPTER (4000 ED and COOLSCAN IV ED)
Film Developed APS (IX240) film cartridges of 15, 25, and 40 frames
Feed Mechanism Automatic feed with built-in motor
Power Source Supplied from scanner
Dimensions 84 × 59 × 208 mm/3.31˝ × 2.32˝ × 8.19˝ (W × H × D)
Weight Approximately 270 g/9.6 oz
Operating Mode Can be used in both vertical and horizontal installations
SA-30 FILM ROLL ADAPTER (4000 ED Only)
Film Rolls of 35 mm film of from two to forty frames (color or mono-
chrome, positive or negative)
Feed Mechanism Automatic feed with built-in motor
Power Source Supplied from scanner
Dimensions • Adapter:80× 70 × 230 mm/3.15˝ × 2.76˝ × 9.06˝
(W × H × D)
• Take-up reel:90× 160 × 230 mm/3.54˝ × 6.30˝ × 9.06˝
(W × H × D)
Weight • Adapter: Approximately 500 g/1 lb 1.86 oz
• Take-up reel: Approximately 500 g/1 lb 1.86 oz
Operating Mode Can only be used in a vertical installation
SF-200 (S) SLIDE FEEDER (4000 ED Only)
Film Mounted 35 mm slides, 1.0–3.2 mm in thickness, 49–50.8 mm in width
Number of slides Approximately 50 slides with a thickness of 1.5 mm
Housing Space Approximately 78.5 mm
Feed Mechanism Automatic feed with built-in motor
Power Source Supplied from scanner
Dimensions 142 × 85 × 325 mm/5.59˝ × 3.35˝ × 12.80˝ (W × H × D)
Weight Approximately 770 g/1 lb 11.50 oz
Operating Mode Can only be used in a horizontal installation
To Next Page
Loading...
Need help?
General