86
Caring for Adapters
Storing the SA-21 Strip-Film Adapter
Remove the SA-21 strip-film adapter from the scanner when not in use. If you will not be using the
adapter for an extended period, store it where:
• the temperature is between minus twenty and plus sixty degrees Centigrade (–4°F – +140°F)
• the humidity is between twenty and ninety percent (no condensation)
Cleaning the SA-21 Strip-Film Adapter
When cleaning the strip-film adapter, press the release button on the upper cover and open the front
panel. Open and remove the upper cover.
Release button
Upper cover
Front
panel
To Next Page
Loading...
Need help?
General