92
Specifications
Specifications for Your Scanner, Accessories, and Optional Adapters
Scanner Specifications
SUPER COOLSCAN 4000 ED (LS-4000 ED)
Film • 35 mm film: Positive and negative film, both color and mono-
chrome, may be used. Film may be scanned in
strips of up to six frames (rolls of up to forty
frames can be scanned using the optional SA-
30 film-roll adapter) or mounted as 35 mm slides
using mounts of from 1.0–3.2 mm in thickness
and 49.0–50.8 mm in width (up to fifty slides
can be automatically scanned in sequence using
the optional SF-200 (S) slide feeder).
• APS (IX240) film: APS film cartridges can be scanned with the op-
tional IA-20 (S) adapter for APS (IX240) film.
• Prepared slides: Prepared slides can be scanned using the op-
tional FH-G1 slide holder for the MA-20 (S).
Aperture 25.1 × 36.8 mm when scanning 35 mm film in the MA-20 (S) or SF-200 (S)
25.1 × 38.0 mm when scanning 35 mm film in the SA-21 or SA-30
18.6 × 28.4 mm when scanning APS (IX240) film
Scan range 3946 × 5782 pixels when scanning 35 mm film in the MA-20 (S) or
SF-200 (S)
3946 × 5959 pixels when scanning 35 mm film in the SA-21 or SA-30
2916 × 4453 pixels when scanning APS (IX240) film
Effective aperture 22.5 × 34.3 mm when scanning 35 mm film in the MA-20 (S) or SF-200 (S)
23.3 × 36.0 mm when scanning 35 mm film in the SA-21 or SA-30
16.1 × 26.9 mm when scanning APS (IX240) film
Effective scan range 3529 × 5379 pixels when scanning 35 mm film in the MA-20 (S) or
SF-200 (S)
3654 × 5646 pixels when scanning 35 mm film in the SA-21 or SA-30
2525 × 4219 pixels when scanning APS (IX240) film
Scanning system Fixed-film, movable-plane single-pass optical scanning system
Light source Red, green, and blue (RGB) LEDs
Sensor 3964-pixel, linear CCD image sensor
Color separation Performed by RGB color LEDs
Optical resolution Maximum 4000 pixels per inch
Analog-to-digital (A/D) conversion
14 bits per color (RGB)
To Next Page
Loading...
Need help?
General