18
Step 7: Install Nikon Scan 3
Installing the Driver Software for Your Scanner
Before using your Nikon Scanner, you will need to install Nikon Scan 3 driver software, which acts as an
interface between the scanner and your computer. To install Nikon Scan, follow the steps below.
Windows users can start from Step 7-1, Macintosh users from Step 7-6. For detailed installation
instructions, see the Nikon Scan 3 Reference Manual.
Installing Nikon Scan 3 under Windows
7-1
Before installing Nikon Scan, be sure that:
• Your computer meets the system requirements for Nikon Scan
• You have turned off any virus-checking software that may be running
• You have exited all other applications
After checking the above points, insert the Nikon Scan 3 CD in the CD-ROM drive.
7-2
The Welcome window will be displayed. Click Nikon Scan 3.
Depending on where you purchased your scanner, you may be prompted to select the language in
which Nikon Scan’s menus and dialogs will be displayed. Choose a language from the list provided.
Pg. For more information on:
5 System requirements for Nikon Scan
7 Installing Nikon Scan
You will need to login as an “Administrator” to install the Nikon Scan 3 (Windows 2000 only).
To Next Page
Loading...
Need help?
General