Nikon CoolScan IV ED User Manual

A–3
Installing the IEEE 1394/Firewire Interface Board in a PCI Slot
After turning the computer off and disconnecting all cables, insert the interface board in one of the
computer’s PCI slots as shown below. For information on the location of the PCI slots and on installing
PCI boards, see the documentation provided with your computer.
Do not use force when installing the interface board. Excessive force could damage the computer or the
board.
If you will be using the interface board with de-
vices that require power to be supplied by the
computer, you will need to connect the board
to the computer’s power supply. You will not
need to connect the power supply if you will
only be using the 4000 ED, which receives power
from an external source.

Nikon CoolScan IV ED Specifications

General

Brand	Nikon
Model	CoolScan IV ED
Category	Scanner
Language	English