Nikon CoolScan IV ED User Manual

A–6
Step 2
Click on the My Computer icon with the right mouse button and
select Properties from the menu that appears.
Windows Me
The first time the computer is powered on with the board in place, Windows Me will automatically
install the board drivers. To confirm that the drivers are installed and functioning normally:
Step 1
The dialog shown at right will be displayed. Click
Yes to restart your
computer.
Windows 2000
The first time the computer is powered on with the board in place, Windows 2000 will automatically
install the board drivers. To confirm that the drivers are installed and functioning normally:
Step 1
Click on the My Computer icon with the right mouse button and
select Properties from the menu that appears.
Step 2
In the System Properties window, open the Hardware tab and click the Device Manager button.
Step 3
Check that “NEC Firewarden OHCI Compliant IEEE 1394 Host
Controller” appears in the Device Manager under “IEEE 1394 Bus
host controllers.”
Step 3
In the System Properties window, click the Device Manager tab.
Check that “NEC Firewarden OHCI Compliant IEEE 1394 Host
Controller” appears in the Device Manager under “1394 Bus Con-
troller.”

Nikon CoolScan IV ED Specifications

General

Brand	Nikon
Model	CoolScan IV ED
Category	Scanner
Language	English