Nikon CoolScan IV ED User Manual

82
• Insert the FH-3 into the MA-20 (S) slide mount
adapter with the aperture to be scanned to-
wards the scanner.
Do not attempt to force the film holder into the adapter slot, as this could damage the scanner. Use a
blower to remove dirt and dust from the film and film holder. Dirt and dust can lower scan quality and
scratch the film. After scanning, remove the film holder from the adapter and the MA-20 (S) from the
adapter slot, then close the sliding cover.
• To remove the FH-3 from the adapter, wait
until the scanner’s status LED glows steadily
and then remove the FH-3 by hand. Do not
use the eject button on the MA-20 (S).

Nikon CoolScan IV ED Specifications

General

Brand	Nikon
Model	CoolScan IV ED
Category	Scanner
Language	English