BasicSetup
Thefirst time tile camera is turned on, the language selection dialog shown in Step 1will be
displayed in the monitor. Follow the steps below to choose a language and set the time
and date. No photographs can betaken until the cameraclock hasbeen set.
2
Turn camera on,
@
Select language.
3
®
Display map of world time zones. *
4
@
Select local time zone.
UTC field shows time difference between selected time zone and Coordinated Universal Time
(UTC), in hours,
5
7
9
@
Display daylight saving time options.
@
Display date menu.
@
Exit to shooting mode.
6
@
Highlight On if daylight saving time is in effect.
8
®
Press multi selector left or right to select item,
up or down to change.
To reset the camera clock, choose a new time
zone, turn daylight saving time on or off, or
choose the order in which the year, month, and
date are displayed, use the World time option it/
the setup menu (_ 83).
L_ Using CameraMenus
The language menu is only displayed automatically the first time the camera is turned on. See the
Menu Guide (_ 63) for information on normal menu operatior/.
Introduction:FirstSteps 11
To Next Page
Loading...
Need help?
General
