14: Built-in Flash (P, S, A, and M Modes Only)
Choose a flash control mode for tile built in flash or tile optional
SB 400 Speedlight.
TTL(default): Flash output is adjusted automatically in response to
shooting conditions.
Manual:Tile flash fires at the level selected in the menu shown at
right. At full power, the built in flash has a Guide Number of 18/59
(ISO 200, m/ft., 20°C/68°F).
A _ icon flashes in the viewfinder and shooting information dis
play when Manual is selected.
_The Optional Speedlight
SB-4OO
When an optional SB 400 Speedlight is attached, Custom Setting 14 is
used to choose the flash control mode for the SB 400 and the name
changes to OptionaJ SpeedJight.
15: Auto off Timers
Choose how long the monitor and exposure meters (_ 14)
remain on when no operations are performed. Choose a shorter
auto off delay for longer battery life.
Option Description
Monitor and exposure meters remain on for 4s. When Image review is or], pictures are
Short
dispJayed in monitor for 4s after shooting (_ 75).
Normal Monitor and exposure meters remain on for 8s. When Image review is on, pictures are
(default) displayed in monitor for 4s after shooting (_ 75).
Monitor remains on for 20s; exposure meters remain on for 1minute. When Image
Long review is on, pictures are displayed in monitor for 20s after shooting (_ 75).
Choose monitor off delay and image review time from 4s, 8s, 20s, 1minute, and
Custom
10minutes. Choose auto meter-off dday from 4s, 8s, 20s, 1minute, or 30 minutes.
Note that the shooting information display turns off automatically when the exposure
meters turn off.
MUsing anACAdapter
Regardless of the setting chosen, the monitor and exposure meters do not turn off automaticalJy
when the camera is powered by an optional EH-B AC adapter and EP B AC adapter connector (_ 103).
78 MenuGuide/CustomSettings
To Next Page
Loading...
Need help?
General
