Connecting the Printer
Before printing, check that the camera battery is fully charged. If in doubt, charge the bat
tery or use an EH 5 AC adapter and EP5 AC adapter connector (available separately; _ 103).
1 Set the camera USB option to PTP (_ 84).
Turn the printer on.
Turn the camera off.
4
Connect the supplied USBcable as shown. Do not use force or attempt to insert the
connectors at an angle. Connect tile can]era directly to the printer; do not connect
tile cable via a USBhub or keyboard.
Turn the camera on. A welcome screen will be displayed,fol
lowed by the PictBridgeplayback display. Proceedto "Printing
PicturesOne at a Time" (_ 59) or "Printing Multiple Pictures"
Presstile multi selector left or right to view additional photographs, or press the Q but
ton to zoom in on the current photo (_ 53). To view six photographs at a time, press
the Q button. Use the multi selector to highlight photographs, or press _ to display
the highlighted photograph full flame.
58 Reference:Connectingto aComputer,Printer,orTV/PrintingPhotographs
To Next Page
Loading...
