Creating a DPOF Print Order: Print Set
The Print set (DPOF) option in the playback menu is used to create digital "print orders" for
PictBridge compatible printers and devices that support DPOF. Selecting Print set (DPOF)
from the playback menu displays the menu shown in Step 1.
3
4
@
Highlight Select/set.
2
@
Display selection dialog.
Select pictures and specify number of prints as described in Steps 1-3 on previous page,
Note that RAW (NEF) photos can not be selected for printing.
Display options. Highlight option and press
multi selector right:
• Bata imprint: Print shutter speed and aperture
on all pictures in print order.
• mmprintdate: Print date of recording on all pic-
tures in print order.
To complete print order and exit, highlight
Done and press OK.
To print the current print order when the camera is connected to a PictBridge printer, select
Print (DPOF) in the PictBridge menu and follow the steps in "Printing Selected Photo
graphs" to modify and print the current order (_ 60). DPOF date and data imprint options
are not supported when printing via direct USB connection; to print the date of recording
on photographs in the current print order, use the PictBridge Time stamp option.
Print Set
The Print set (DPOF) option car/not be used if there is not enough space on the memory card to
store the print order.
Print orders may not print correctly if images are deleted using a computer after the print order is cre-
ated.
Reference:Connectingto a Computer,Printer,orTV/PrintingPhotographs
61
To Next Page
Loading...
Need help?
General
