Copying White Balance from a Photograph
A white balance value copied from an existing photograph can be used for preset white
balance. Select White balance>White balance preset in the shooting menu. The menu
shown in Step 1 will be displayed.
1 2
Highlight Use photo. *
_To use last measured value (_ 71), highlight Measure and press multi selector right.
4
Highlight Select image.
Display current source photo.
Display folder list.
tTo use current source photo, highlight This image arid press OK.
5
Highlight folder.
¸'¸¸8
Display images in selected folder.
7
Highlight photograph, t To view highlighted Set preset white balance to value for high-
picture full frame, press and hold Q button, lighted photograph and return to shooting
menu.
images displayed may include those created with other cameras, but only photographs created
with D40 can be used as source for preset white balance.
Note that ira new value is measured for white balance, white balance will be set to the mea
sured value even if Use photo is currently selected in the preset white balance menu.
72 MenuGuide/ShootingOptions:TheShootingMenu
To Next Page
Loading...
Need help?
General
