Nikon D4s - Page 102

80
y
4 Choose the current frame as the new
start or end point.
To create a copy that begins from the
current frame, highlight Start point and
press J.
The frames before the current
frame will be removed when you save the
copy.
To create a copy that ends at the current frame, highlight End
point and press J.
The frames after the current frame will be
removed when you save the copy.
5 Confirm the new start or
end point.
If the desired frame is not
currently displayed, press 4 or
2 to advance or rewind (to skip
to 10 s ahead or back, rotate the
main command dial; to skip to an index, or to the first or last
frame if the movie contains no indices, rotate the sub-
command dial).
Start point
End point