Nikon D4s - Monitor Color Balance

360
U
Use the multi selector as shown below to
adjust monitor color balance with reference
to a sample image. The sample image is the
last photograph taken or, in playback mode,
the last photograph displayed; to choose a
different image, press the W button and
select an image from a thumbnail list (to view
the highlighted image full frame, press and
hold X; to view images in other locations,
press W and select the desired card and
folder as described on page 242).
If the
memory card contains no photographs, an empty frame with a
gray border will be displayed in place of the sample image.
Press
J to exit when adjustments are complete.
Monitor color balance
applies only to menus, playback, and the view through the lens
displayed during live view photography and movie live view;
pictures taken with the camera are not affected.
Monitor Color Balance
G button ➜ B setup menu
Increase amount of green
Increase amount of blue Increase amount of amber
Increase amount of magenta