89
d
❚❚ Camera Controls
1 Assign image area selection to a camera control.
Select Choose image area as the “press + command dials”
option for a camera control in the Custom Settings menu
(0 341).
Image area selection can be assigned to the Fn
button (Custom Setting f3, Assign Fn button, 0 337), the Pv
button (Custom Setting f4, Assign preview button, 0 342),
the center of the sub-selector (Custom Setting f6, Assign sub-
selector center, 0 342), or the movie-record button (Custom
Setting f16, Assign movie record button, 0 349).
2 Use the selected control to choose an image area.
The image area can be selected
by pressing the selected
control and rotating the main
or sub-command dial until the
desired crop is displayed in the
viewfinder (0 87).
The option currently selected
for image area can be viewed by
pressing the control to display the image
area in the top control panel or
information display.
FX format is
displayed as “36 × 24”, 1.2 × as “30 × 20”,
DX format as “24 × 16”, and 5 : 4 as
“30 × 24”.
Fn button Main
command dial
To Next Page
Loading...
