115
k
4 Start the timer.
Press the shutter-release
button all the way down to
start the timer.
The self-timer
lamp will start to flash.
Two
seconds before the photograph is taken, the self-timer lamp
will stop flashing.
The shutter will be released about ten
seconds after the timer starts.
To turn the self-timer off before a photograph is taken, turn the
release mode dial to another setting.
A See Also
For information on choosing the duration of the self-timer, the number
of shots taken, and the interval between shots, see Custom Setting c3
(Self-timer, 0 325).
For information on controlling the beeps that
sound when the self-timer is used, see Custom Setting d1 (Beep,
0 326).