219
t
❚❚ Interrupting Multiple Exposures
To interrupt a multiple exposure before the
specified number of exposures have been
taken, select Off for multiple exposure mode.
If shooting ends before the specified number
of exposures have been taken, a multiple
exposure will be created from the exposures
that have been recorded to that point.
If Auto gain is on, gain will
be adjusted to reflect the number of exposures actually recorded.
Note that shooting will end automatically if:
• A two-button reset is performed (0 211)
• The camera is turned off
• The battery is exhausted
•Pictures are deleted
To Next Page
Loading...
