Nikon D4s - Page 258

236
t
The camera can store data for up to nine non-CPU lenses. To enter
or edit data for a non-CPU lens:
1 Select Non-CPU lens
data in the setup menu.
Press the G button to
display the menus.
Highlight Non-CPU lens
data in the setup menu
and press 2.
2 Select a lens number.
Highlight Lens number and
press 4 or 2 to choose a lens
number between 1 and 9.
3 Enter the focal length and
aperture.
Highlight Focal length (mm) or
Maximum aperture and press
4 or 2 to edit the highlighted
item.
Focal length can be
selected from values between 6 and 4000 mm, maximum
aperture from values between f/1.2 and f/22.
4 Save settings and exit.
Press J. The specified focal length and
aperture will be stored under the chosen
lens number.
G button
J button