273
Q
2 Start Nikon Transfer 2 component of ViewNX 2.
If a message is displayed prompting you to choose a program,
select Nikon Transfer 2.
D The USB Cable Clip
To prevent cable from being disconnected, attach the supplied clip
as shown.
A USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
A Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under Import pictures and
videos, click Change
program.
A program
selection dialog will be
displayed; select Import file
using Nikon Transfer 2 and
click OK.
2 Double-click Import file.
To Next Page
Loading...
