409
n
LAN adapters
(0 276)
• Wireless Transmitter WT-4: Connects the camera to wireless
and Ethernet networks.
The photographs on the camera
memory card can be copied to a computer for long-term
storage.
The camera can also be controlled from any
computer on the network using Camera Control Pro 2
(available separately).
• Wireless Transmitter WT-5: Connect the WT-5 to the camera’s
peripheral connector to upload pictures over a wireless
network, to control the camera from a computer running
Camera Control Pro 2 (available separately), or to take and
browse pictures remotely from a computer or iPhone.
• Communication Unit UT-1: When connected to the camera
using the USB cable supplied with the unit, the UT-1 can
be used to connect to Ethernet networks (or, with a WT-5,
to wireless networks) and upload pictures to an ftp server
or control the camera remotely using optional
Camera Control Pro 2 software.
Note: An Ethernet or wireless network and some basic network
knowledge is required when using a communication unit or
wireless transmitter.
Be sure to upgrade the software supplied
with the communication unit or wireless transmitter to the
latest version.
To Next Page
Loading...
