596
Camera Control
1
Select [Enable] for [Wired LAN/
WT] > [Wired LAN/WT
functions] in the setup menu.
•
When you press
J
, the camera will
connect using the most recently-
used network profile. To connect
using a different profile, proceed to Step 2. Otherwise,
proceed to Step 3.
•
When a connection is established,
the network name will be shown in
green in the [Wired LAN/WT]
display.
•
If the network name is not
displayed in green, connect using
the computer’s wireless network settings.
To Next Page
Loading...
