669
Radio AWL
7
f
: Confirm that the flash-ready lights for all flash
units are lit.
In radio AWL, the flash-ready indicator will light in the
camera viewfinder or flash information display when all flash
units are ready.
D
Listing Remote Flash Units
To view the flash units currently controlled using radio AWL, select [Flash
control]> [Radio remote flash info] in the camera photo shooting
menu.
•
The identifier (remote flash unit name) for each unit can be changed
using flash unit controls.
D
Reconnecting
As long as the channel, link mode, and other settings remain the same,
the WR-R10 will automatically connect to previously paired flash units
when you select remote mode, and Steps 3–6 can be omitted. The flash
unit LINK lamp lights green when a connection is established.
1
Connected flash unit
2
Group
3
Flash-ready indicator
To Next Page
Loading...
