811
A
Custom Settings: Fine-Tuning Camera Settings
Choose the area from which data are obtained to assist focus
when the shutter-release button is pressed halfway with
[Single-point AF] or [Dynamic-area AF] selected for AF-area
mode.
Choose whether the camera detects and focuses on faces when
[3D-tracking] is selected for AF-area mode.
a7: Single-Point AF Watch Area
G
button
U
A
Custom Settings menu
Option Description
[Normal]
The camera locates subjects based solely on data from the
vicinity of the selected point.
[Wide]
The camera uses data from surrounding areas to locate
subjects slightly outside the selected focus point. Use for
fast-moving subjects.
•
If [Wide] is selected, the AF-area mode indicators in the
viewfinder and top control panel will show
2
when
[Single-point AF] is chosen for AF-area mode.
a8: 3D-Tracking Face-Detection
G
button
U
A
Custom Settings menu
To Next Page
Loading...
