Nikon D6 - Page 903

851
A
Custom Settings: Fine-Tuning Camera Settings
•
The roles that can be assigned are listed below. The roles
available vary with the control.
Role Description
A
[Preset focus
point]
Pressing the control selects a preset focus point.
•
To choose the point, highlight it, hold the
control, and press the AF-mode button until
the focus point flashes.
•
Separate focus points can be selected for
“wide” (landscape) orientation and for each of
the two “tall” (portrait) orientations if an option
other than [Off] is selected for Custom Setting
a5 [Store points by orientation].
•
The behavior of the selected control can be
chosen by pressing
2
when [Preset focus
point] is highlighted.
-[Press to recall focus point]: Pressing the
control recalls the preset focus point.
-[Hold to recall focus point]: The preset focus
point is selected while the control is pressed.
Releasing the control restores the focus point
selected before the control was pressed.