304
❚❚ Removing the Battery Pack
To remove the MB-D18, turn the camera off and set the control
lock on the MB-D18 to L, then loosen the attachment wheel by
rotating it in the direction opposite to that shown by the LOCK
arrow and remove the MB-D18.
❚❚ Inserting Batteries
The MB-D18 can be used with one EN-EL15a or EN-EL18b
rechargeable battery or with eight AA batteries. Before inserting
batteries, be sure that the camera is off and that the MB-D18
control lock is in the L position.
1 Unlatch the MB-D18 by rotating the battery-chamber latch
to A and remove the battery holder.
To Next Page
Loading...
