Chapter 2 Microscopy
26
Place the sample onto the stage to adjust the focus.
1 Use the sample holder according to the selected
sample. Place the sample onto the stage and
move the stage using the stage movement knob
for the X/Y direction so that the observation
position comes to the center of the view-field. (See
3.8.)
2 Turn the coarse/fine focus knobs and focus on the
sample. (See 3.7.)
Adjust the diopter and the interpupillary distance.
1 Adjust the interpupillary distance. (See 3.5.)
2 Adjust the diopter. (See 3.6.)
Adjust the focus again.
1 Look into the eyepieces. Move the stage to bring
the observation target into the center of the
view-field using the stage movement knob for the
X/Y direction.
2 Look into the eyepieces. Adjust the focus onto the
sample by turning the coarse/fine focus knob.
4-1
4-2
4-1
6-2
6-1
6-1, 2
To Next Page
Loading...
