Nikon SB-910 - Optional Accessories

H–10
H
Tips on Speedlight Care and Reference Information
Optional Accessories
Speedlight Stand AS-21 ■
Same as that provided with this SB-910.
■ Color Filter Set SJ-3
A total of 20 fi lters in eight colors
are included. These are used with the
separately available Color Filter Holder
SZ-2.
FL-G1 (fluorescent filter) ·
FL-G2 (fluorescent filter) ·
TN-A1 (incandescent filter) ·
TN-A2 (incandescent filter) ·
RED ·
BLUE ·
YELLOW ·
AMBER ·
■ Color Filter Holder SZ-2
(included with the SB-900)
Used with SJ-3 color fi lters
■ Water Guard WG-AS1,
WG-AS2, WG-AS3
Used to protect the camera’s accessory
shoe contact when the SB-910 is
mounted on a Nikon digital SLR camera
WG-AS1: for D3 series
WG-AS2: for D300 series
WG-AS3: for D700
■ Wireless Slave Flash
Controller SU-4
Useful for wireless multiple fl ash-
unit photography, the SU-4 features
a built-in, movable light sensor and
an accessory shoe for attachment of
a remote fl ash unit. The SU-4’s light
sensor triggers the remote fl ash unit to
fi re in sync with the master fl ash unit.
■ TTL Remote Cord SC-28/17
(approx. 1.5 m/4.9 ft)
The SC-28/17 enables i-TTL mode when
the SB-910 is used off-camera. The
fl ash shoe comes with a tripod socket.
TTL Remote Cord SC-29 ■
(approx. 1.5 m/4.9 ft)
The SC-29 enables i-TTL mode when
the SB-910 is used off-camera. The
SC-29 features an AF-assist illumination
function.