Nikon SB-910 - Non-TTL Auto Flash Mode

C–8
C
Flash Modes
Non-TTL Auto Flash Mode
The SB-910’s light sensor for non-TTL auto fl ash measures the fl ash that is refl ected
on the subject, and the SB-910 controls the fl ash output level according to the
refl ected fl ash data.
Setting non-TTL auto flash mode
Non-TTL auto fl ash mode can be set as a non-TTL auto fl ash mode option in the
custom settings. (0B-17)
The default setting of the non-TTL auto flash mode option is auto aperture flash •
(non-TTL auto flash with aperture priority) with monitor pre-flashes.
Press the [MODE] button.
Rotate the selector dial to
display .
Press the [OK] button.
Non-TTL auto flash mode LCD example
Aperture; underlined when aperture is set on
the SB-910
: Monitor pre-fl ashes
: Non-TTL auto fl ash